← Back to the blog

Sewing tips · Sewing videos

Sewing a neat square collar insert – varsity jacket

Simone Borchers

Blogcover: Eckigen Krageneinsatz sauber nähen

Sewing · Sewing pattern · Technique

The square collar insert – finishing Mølna's neckline neatly

On Mølna, the neckline defines the whole character of the jacket: square instead of round, crisp instead of soft. For the corner to sit really neatly in the end, the order in which collar, zip and facing come together is what counts. That's exactly the sequence I show you here step by step.

Mølna varsity jacket cover with square collar insert

The square collar insert – the detail that sets Mølna apart from a classic varsity jacket

Why a square instead of a round collar insert?

Most varsity jackets have a round, softly tapering collar insert. On Mølna, the collar meets the zip in a crisp corner instead – a detail that needs more precision when sewing but creates the modern, clean look that defines the jacket.

For this corner to turn out really neat, collar, zip and facing aren't simply sewn on one after another, but built up in a specific order where each seam starts at the previous one. That's the sequence we'll go through now.

Collar to bodice

First, press the collar wrong sides together along the fold. Then pin it to the jacket neckline at the short sides only, starting 1 cm from the centre front, and sew it on with a straight stitch (stitch length 2.4).

Now comes the decisive moment: clip the corner of the jacket almost up to the seam. Only this clip makes it possible to turn the collar around the corner. Then pin the rest of the collar to the neckline and join it with a straight stitch (SL 2.4), starting right at the seam you sewed before.

Collar to bodice, step 1 Collar to bodice, step 2 Collar to bodice, step 3 Collar to bodice, step 4

Preparing the zip

The zip is sewn to the centre front of the main fabric. Prepare the top ends by folding them over and securing them – this keeps the later corner at the neckline clean, without protruding ends. Then pin the zip right sides together to the front.

Join it with a straight stitch and a zipper foot; the seam allowance is 0.8 cm. Make sure both halves of the zip are sewn on truly symmetrically – small deviations here will show later exactly at the corner of the collar insert.

Zip, step 5 Zip, step 6

Facing: the neckline from the inside

First pin the facing to the jacket neckline at the short sides only, again starting 1 cm from the centre front, and sew it on with a straight stitch (SL 2.4). Then clip the corner of the facing almost up to the seam, exactly as with the collar.

Pin the rest of the facing to the neckline, the zip and the hem. Thanks to the clip, it now turns around the corner. Join it with a straight stitch (SL 2.4), starting at the seam you sewed before, until the whole facing is attached to the bodice. The neckline is now finished just as neatly inside as outside.

Facing, step 7 Facing, step 8 Facing, step 9

The collar insert in motion

Some steps are simply easier to see than to read – especially the moment when collar and facing turn around the clipped corner. In the full sewing video I show you the whole Mølna; you can jump straight to the collar insert chapter (video in German).

The finished Mølna

Sewn neatly, the square collar insert shows up as a clean, sharp edge at the neckline, inside and out. It's exactly this detail that makes Mølna recognisable at first glance.

Finished Mølna varsity jacket, front view with collar insert Finished Mølna varsity jacket, neckline detail Mølna varsity jacket worn every day

The Mølna pattern with the square collar insert is available in my shop as an instant download, or as an A0 paper pattern with the printed sheet sent by post (Germany only).

Sewing pattern · Women Mølna sizes 30–60

One more detail gets its own post

I'll soon show you the single welt pocket in its own detailed post:

Sewing a single welt pocket

The whole jacket at a glance

How Mølna is constructed, which fabrics work and how to choose the right file format for cutting – you'll find all that in the first article about the varsity jacket:

Blog post Sewing a varsity jacket with a square collar insert

Happy sewing 🖤

Your Simo

Keep reading

Related articles

All articles

Comments (0)

Leave a comment

Comments are reviewed before publication.